MADE IN AUSTRALIA FOR LEGENDARY PERFORMANCE, WITH A GREAT BLOW OFF VALVE SOUND! Not just a noise-maker, get improved performance too!
If you want sound with your performance (or performance with your sound!), GFB’s VTA delivers just that! By combining the proven performance benefits of our ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions.
Features » TMS Technology for faster boost recovery on gearshift and during throttle modulation » Improved boost holding ability » Atmosphere venting for blow-off sound » Retains ECU control » Simple, direct bolt-on kits include everything you need to install » Manufactured in Australia in accordance with ISO 9001 » Worldwide PCT Patents Pending
The VTA shares the successful DV+ design philosophy: “Keep what works, replace what doesn’t”. This means we retain ECU control and the solenoid from the factory diverter to ensure the fastest possible response time, without the added and unnecessary cost of replacing the solenoid like some brands do.
The weak part of the factory diverter has always been the plastic valve mechanism – this is the part we replace. The VTA features CNC machined billet components that last a lifetime, and we also change the valve operation method for better performance. The factory diverter valve can only operate in two states – open, or closed. When it opens fully at low boost, or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition.
Pilot Operation GFB pioneered the use of “pilot operation” in the DV+, which works by re-purposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve.
It is this design philosophy that makes the VTA not only the best performing blow off valve solution, but also the best value on the market.
There have been no reviews for this product.
Go Fast Bits - http://www.gofastbits.nl Go Fast Bits started back in 1997 designing, testing and developing GO FAST BITS. Today a wide range of innovative and high-quality blow-off valves, boost controllers, pulley kits and short shifters are available. All meticulously designed and manufactured from the highest grade materials. GO FAST BITS products are manufactured in Australia and GFB is constantly developing new and innovative products!
Showoff Imports is the official distributor for GFB parts for the Netherlands and Belgium. Currently we stock all popular products, so no waiting times! Dealers inquiries welcomed.
What makes GFB blowoff valves different and better?
Our new TMS Turbo Management System don't throw your BOOST away but INCREASES IT BY up to 40%. GFB's Turbo Management System (TMS) parts offer multiple performance benefits over factory diverter valves. We looked at the concept named ‘blowoff valve’ and took this to a whole new level! Basically the main benefits are:
MORE POWER - BETTER RESPONSE - BETTER DRIVE ABILITY - GET THE SOUND OR NOT.
How to choose a BOV
With the vast range of GFB blow-off valves, questions rise 'Which blow-off valve is the best?' and 'Which blow-off valve should I use?'
The first question is easy to answer: There isn't actually a 'best' in terms of quality. All GFB blow-off valves use the same high-quality internal components. So, provided the right BOV is fitted for your particular vehicle, they all offer the same performance benefits of improved throttle response and reduced lag. The real question is: How do you select the valve for you?
The first step to decide on 'your' BOV, is whether or not you want to hear it, and if so, how much? The following chart lists the “noise ratings” of our blow-off valve range. The final decision will then be based on how much control you want over the blow-off volume level.
GFB boost controllers use a more consistent needle-valve bleed system, which brings boost on just as fast as any ball-and-spring system, and generally more quickly than a factory boost control system. On the productpages you can find a comparison of the GFB controller to other major brands, guess who wins this standoff? GFB!
A GFB boost controller will give you the added benefit of not only being able to adjust the peak boost level, but in most cases will bring the boost on earlier, resulting in more power throughout the rev range.
The reduction in rotating inertia (we've removed about 2kg by using 6061 T6 aluminum billet) means that the engine can accelerate much quicker during the times it is making very little power before the turbo spools up. The result is better drive ability off-boost and better acceleration, which is especially useful for those with large turbos that only make power in the upper rev range. The smaller size of the crank pulley under-drives the power robbing accessories so that the upper end of the rev range is less burdened, while still allowing them to operate properly.
Short Shift Kits
The GFB Short Shifter is the same height as the factory shifter, it is the actual distance that the gear stick moves between gears that reduced.
Very simple to install. All of the installation is done from inside the car, without having to jack it up and crawl around underneath. Only a few basic hand tools are required, and the necessary hex keys are supplied.
The maximum throw reduction varies for different models. Early WRXs had a particularly long throw, so the maximum reduction with the GFB kit is around 50%, whilst on later models it is closer to 40%. In either case, it is possible to reduce the distance per gate to about 30mm. Whilst it can go shorter, the shifting force becomes too great for comfort, and some of the shift feel is lost.
Download the GFB 2011 Catalog here:
Link to Youtube video about GFB in general:
Link to Youtube video showing a demo of the TMS Blowoff Valves on a GTR:
Youtube video about the benefits of TMS valves vs normal blowoff valves: